• Lembaran tatakan ini terbuat dari bahan yang di coating dengan Teflon, sehingga bahan lain tidak akan menempel di tatakan ini.
• Bisa di gunakan untuk kegiatan clay craft, atau menyolder, atau juga urusan membuat kue (agar tidak menempel), mudah di bersihkan dan di pakai berulang kali.
• Bisa juga di pakai sebagai alas untuk menyetrika (tahan panas).
• Bisa di masukkan ke oven ( tahan panas ).dan siap dipakai ulang.

• Lembaran tatakan ini terbuat dari bahan yang di coating dengan Teflon, sehingga bahan lain tidak akan menempel di tatakan ini.
• Bisa di gunakan untuk kegiatan clay craft, atau menyolder, atau juga urusan membuat kue (agar tidak menempel), mudah di bersihkan dan di pakai berulang kali.
• Bisa juga di pakai sebagai alas untuk menyetrika (tahan panas).
• Bisa di masukkan ke oven ( tahan panas ).dan siap dipakai ulang.

For paper, fiber and decorative arts. Ultra Thick Embossing Enamel™ (UTEE) is a specially formulated, large particle embossing powder. Use a heat tool to produce textured embossing. For one-of-a-kind art and jewelry, melt UTEE in Ranger’s Melting Pot®. Pour into molds to create 3-D artifacts or dip to coat a variety of objects. Available in 3 oz. shaker jars (Clear UTEE available in 4 oz).

Create custom colors with your Ultra Thick Embossing Enamel™. Heat It Inks are transparent, heat-safe, acid free, additive used to colorize Ultra Thick Embossing Enamel™. Needle point applicator tip allows applications of as little as one drop.

Easy-to-use modeling pellets that soften in warm water for sculpting or pressing into molds.

Heating instructions for Friendly Plastic® Pellets:

1. Heat water in electric skillet until temperature reaches 140°F (60°C) to 150°F (66°C) for about five minutes. Set control to 150°F (66°C) or less. Most electric skillets have a low/simmer setting. Test with cooking thermometer. Add one or two drops of cooking oil to water to prevent sticking.
2. Pour Friendly Plastic® pellets into the hot water. Let set in water for about 30 seonds at 150°F (60°C) to 60 seconds at 140°F (60°C) until transparent. Pellets will stick together. Wet hands and remove from water.
3. Shape with your hands or press into a mold. When the desired shape is formed, place into cold water for three to five minutes. Place back in hot water for further shaping.

Friendly Plastic Designer Sticks are a non-toxic plastic that can be used to create exciting jewelry, accessories, home decor and wearable art projects. Finished pieces made with Friendly Plastic can be used alone or combined with jewelry findings, picture frames or anything that pleases your imagination.
This is a wonderful creation! It is so easy to use, soften in a container of hot water in a matter of minutes or using hobby heater, cut or form and let cool.
Make beads, frames, pendants, embellishments, buttons,etc.
Use Marbling Comb to make a marble motif.