Create perfectly parallel strips of clay in just about any width up to 1/2" (12mm) with this hand blade tool. The tool comes with five blades and 12 pairs of brass washers. Arrange the blades and washers in a variety of configurations to achieve the cut width you want. For example, use two blades with all 12 washer pairs to create a single strip approximately 1/2" wide. Or use all five blades separated by single washer pairs to create four strips approximately 1/32" (.8mm) wide. Mix and match blades and washers to achieve whatever width (or widths) you like. Roll out your metal clay, or start with a sheet of PMC® paper. Hold the blade tool at a slight angle, apply firm pressure and pull the blades through the clay slowly and smoothly.
Blade size: 2.25 inch (W) x 0.75 inch(H)

* Set of a handle with 1 roller, 1 cutter and 1 wave cutter.
* Roll out the clay to desired thickness.
* Use cutters for cutting straight or wavy lines.

Ukuran yang tertulis di dalam kurung adalah size terkecil dan terbesar

12 unique designs to make perfect shapes every time. Great for use with oven-bake clay for jewelry making, paper crafting.

Roll clay to desired thickness (using roller or pasta machine) then cut out petals and leaves using shape maker cutters. Assemble flowers and ferns.
Clean the cutter with soap and water after use

• A: Rose and daisy petal flower
• B: Petals for tulips, irises, 5 petal flowers, small sunflowers, small daisies, small coneflowers, trailing flowers, etc
• C: Leaves for holly, vines and various flowers.
• D: Large leaves for various large flowers, vines and foliage.
• E: Maple, and various vern.
• F: Ginko leaves, oak leaves, and heart shape leaves.

Ini adalah clay cutter untuk membuat bunga clay, seperti yang di jelaskan di buku /DVD di bawah ini.

These embossing cutters are ideal for creating beautiful embellishments, accents, or jewelry components from moldable mediums including: polymer, metal, and air dry paper clays. These versatile tools can be used to cut out the desired shape in seconds with beautiful, consistent results time after time. You can cut out using only the outline, leaving the surface flat and unadorned, or emboss the surface with a push of the spring-loaded plunger. Create stunning effects on polymer and air dry paper clays using Foils, decorative powders, metal clay or water-based paints.

Ideal for cutting out windows in clay projects, square hole clay cutter from Kemper® is designed with a built-in plunger to push clay out. Made of high-quality brass with rubber tip for comfort.
Length: 10cm

Kemper Klay Kutter set
Lovely brass cutters made for polymer clay and precious metal clay. These cutters give perfect clean cuts as the cutter is shaped from a brass tube, with no visible joins. Each cutter has a plunger ("pusher-outer") to help you push the clay shape out of the cutter. The cutters are also great for sugar paste, bread dough, soft wax, paint, and modelling paste. You might want to put a little badger balm, olive oil, Slik or similar, around the edge of the cutter to help release the metal clay.

Each set shown below consists of 5 or 7 cutters (depends on the sets) and the price is different for each set.

Kemper Klay Kutter set
Lovely brass cutters made for polymer clay and precious metal clay. These cutters give perfect clean cuts as the cutter is shaped from a brass tube, with no visible joins. Each cutter has a plunger ("pusher-outer") to help you push the clay shape out of the cutter. The cutters are also great for sugar paste, bread dough, soft wax, paint, and modelling paste. You might want to put a little badger balm, olive oil, Slik or similar, around the edge of the cutter to help release the metal clay.

Each set shown below consists of 4 or 5 cutters (depends on the sets) and the price is different for each set.

Bagi yang hobby membuat produk dari clay (polymer clay dll) alat ini sudah pasti mutlak harus punya
Terdiri dari 19 macam bentuk disc (ribbon, kotak, segitiga dll) sehingga anda dapat memproduksi berbagai pola.

Use to press different designs.
20 different discs are included to create many different embellishments, such as:

• The round discs are for vines, stems, borders, and letters.
• The screen discs are for hair, grass, straw, and floral stamens.
• The flat slot discs are for weaving baskets, lattice, ribbons and bows.
• The square, triangle, and half round discs are for bricks, logs, borders, and can be cut and used for small beads.

The clay gun extruder has many uses. With the 20 disc designs you can create many different embellishments for your projects. The round discs are for vines, stems, borders, and letters. The screen discs are for hair, grass, straw and floral stamens.The flat slot discs are for weaving baskets, lattice, ribbons and bows. The square, triangle, half round discs are for bricks, logs, borders, and can be cut and used for small beads.

The clay gun extruder has many uses. With the 20 disc designs you can create many different embellishments for your projects. The round discs are for vines, stems, borders, and letters. The screen discs are for hair, grass, straw and floral stamens.The flat slot discs are for weaving baskets, lattice, ribbons and bows. The square, triangle, half round discs are for bricks, logs, borders, and can be cut and used for small beads.

The "Makin's Professional® Ultimate Extruder Set" combines the next generation of the Makin's® patented screw-type extruder, 20 popular disc designs and 2 extra O-rings in a convenient and secure storage case. The new commercial grade stainless steel extruder incorporates an L-shaped handle with ergonomic grip that can be adjusted to optimize user's comfort, control and torque requirements. The discs included are an assortment of designs frequently used by artists when creating geometric embellishments and complex armatures. The durable case has an easy-accessible resting place for the extruder, ten separators which keep extruder accessories organized in individual storage compartments, a clear see-through top and a double latch locking mechanism. The Makin's® extruder has been accepted in the polymer clay, cake decorating and other industries world-wide as being very durable and designed to meet the diverse applications of professionals working with various types of modeling mediums. For best results thoroughly condition modeling medium to achieve a malleable consistency.

FDA approved ( suitable for food )

Easy Squeeze Extruder for use with Precious Metal Clay (PMC) syringes. Makes extruding and controlling your syringe of metal clay easier.

• This PRO Extruder is a heavy-duty extruder, specially designed for the viscosity of polymer clay with a 26 thrust capacity in the trigger. You can extrude as much as a pound of conditioned clay in the 2 inch (5cm diameter)barrel.
  Note :
  
• This extruder is NOT include the disk
  
• The disk (to make the pattern) is made by order from "laser cut acrylic"
  
• Please send us the drawing, we will produce for you
  
• The price for the "pattern disk" is USD 5 each

Kalau anda ingin mendekorasi HP anda dengan clay, kadang kadang tidak mau merusak casing aslinya, atau nantinya mudah di ganti ganti.
Karena itu, gunakan deco sheet ini sebagai pelapis dasar.
Tempelkan deco sheet ini diatas casing aslinya, dan anda dapat menghias dengan clay atau lainnya di atas sheet ini.
Di Jual per set isi 5 lembar. (per lembar 100x60mm).

Tool for making 7/16" round 5/16" x 5/8" oval and 1/2" bicone beads with clay. Create your own beads for bracelets ankle bracelets necklaces rings and more! Roll consistent uniform beads in 3 popular shapes-oval round and bicone. The Tri-Bead Roller is suitable for use with many kinds of clay including air-dry polymer and precious metal clay.

The Sculpey Bead Maker makes perfectly round beads in seconds! With three sizes to chose from you're on your way to making beautiful polymer clay beads.

• Makes 3 different size beads – 13mm, 16mm, 18mm
• Measuring cups guarantee a perfectly sized bead every time!
• Easy to use, makes beads in seconds!