/ Resin Plaster & Polymer material


Ecozai A1 : Water based Acrylic composite (standard)

EcoZai A1 adalah bahan yang terdiri dari 2 buah komponen yang akan menghasilkan campuran "Composite" yang kuat terhadap cuaca (air dan panas) dan relatif ringan dibanding Cement, dan aman terhadap badan maupun lingkungan.
  • Aman Composite ini terdiri dari 2 bahan (bubuk dan cairan) , dimana kedua duanya adalah bahan yang aman, tidak mengeluarkan gas maupun bau , aman tersentuh tangan, berbasis "water based", tidak mengandung solvent.
  • Mudah pengerjaannya Cukup di campur dengan perbandingan 1 (cairan) : 2 (bubuk), setelah 30 menit akan mengeras dengan hasil yang keras, tahan cuaca (air maupun panas matahari), serta dapat menghasilkan permukaan yang halus dan detail.
    Campuran ini dapat anda tuang ke cetakan ( di cor ), atau dapat juga di tambahkan bahan thickener agar menjadi kental dan dapat di aplikasikan dengan menggunakan kuas atau roll untuk bidang vertikal.
  • Relatif ringan dan kuat Campuran ini dapat di gabung dengan bahan penguat (Basalt fiber atau Glass fiber), sehingga dapat di dapatkan campuran yang relatif tipis ( 3mm - 8mm ) namun sangat kuat.
    Di Eropah, USA, Jepang, campuran composisi ini banyak di pakai sebagai pengganti Fiberglass, atau dipakai sebagai pengganti cement untuk pembuatan permukaan dinding .
Weighing and mixing A1 must be carefully weighed and mixed. The mixing ratio of A1 is 2 parts powder mixed with 1 part resin. Fill the cup or bucket with the required amount of resin. Use the stainless steel High Shear Mixer to create a swirl. Then add the correct amount of powder into the swirl. Continue mixing until a smooth mixture is achieved without lumps and continue to mix for an additional 30 seconds approx. Ensure that none of the material sticks to the bottom and sides and that everything is included in the mixture. Processing time The standard processing time, after mixing, is 20 minutes. When a shorter or longer processing time is required, this can be achieved by adding additives. Curing time A1 is a water-based product. Residual moisture must evaporate before obtaining the final result. The time needed for curing properly depends on several factors, such as the dimension of the object, the temperature and humidity. When the object has been laminated or cast in a mould, it can be removed from the mould as soon as it is strong enough to cope with the forces present. The product will achieve the optimum strength outside of the mould. Cleaning Hands and skin can be washed using soap and water. Clean the equipment with water directly after use. We suggest that the brushes and equipment are cleaned in a bucket of water instead of in a wash basin, as the hardening process continues under water.

This product has some instruction , sample tutorial, click here.

Calculator

  • Merk / Produsen: EcoZai


    * .

    Produk ini ADA VIDEO (click tombol sebelah kiri)
    Leave this field empty
    id:16710(sku:PO-PLAS-A1001)HargaStokQty
    id:16710 (sku:PO-PLAS-A1001)  
      Pilihan (Rp) Harga Stok Qty
    16710-075   Basic SET 0.75 kg 250,000 2
    16710-6   Basic SET 6 kg 1,225,000 8
    16710-75   Basic SET 60 kg 9,550,000 3
    Apa yang mau di tanya
    Nama dan no Telpon TIDAK harus di isi, namun apabila email balasan tidak sampai (karena masuk spam dsb), kami masih bisa menghubungi anda.
    この商品に関するお問い合わせはこちらのフォームをお使いください。
    Kalau anda ingin diberitahu lewat email
    apabila produk sudah ada stoknya
    silahkan klik tombol ini

    Produk yang berkaitan :