/ Resin Plaster & Polymer material


Ecozai A1 : Mold release

EcoZai A1 release agent / 1pc
EcoZai A1 release agent is a petrolatum based wax formulated specifically to release EcoZai A1 casting/laminating products from either plaster or from cured EcoZai A1 itself. It also maybe used as a release agent for rigid polyester molds.
Application Apply to a plaster or EcoZai A1 Using Foam brush or cloth, apply into the “grain” of the mold. Then, using asecond, clean piece of terry cloth, rub off the wax leaving a thin film.Repeat the above procedure for a second time.
Please note: DO NOT use to much (too thick), excess can cause“pocketing” of the gel coat and will decrease releaseproperties.
  • Bottle : 50 gram
  • Merk / Produsen: EcoZai

    Leave this field empty
    id:16714(sku:PO-PLAS-A1008)HargaStokQty
    -- -- 125,000 5
    Apa yang mau di tanya
    Nama dan no Telpon TIDAK harus di isi, namun apabila email balasan tidak sampai (karena masuk spam dsb), kami masih bisa menghubungi anda.
    この商品に関するお問い合わせはこちらのフォームをお使いください。
    Kalau anda ingin diberitahu lewat email
    apabila produk sudah ada stoknya
    silahkan klik tombol ini