Search page brand-89
ImageName
KC-DRX1CP71A1
Shinwa Digital Temperature
Power / AAA alkaline batteries × 2 battery life continuous use for 14 hours
Output : 1mW within (JIS Class 2 )
Temperature measurement range : minus 60 to 500 degrees
Operating temperature : 0 to 50 degrees
Measurement accuracy : plus or minus 2% or plus or minus 2 degrees
( adaptation of the higher number)
Distance: measurement size diameter / 12: 1
Product Dimensions 22.1 x 12.9 x 5 cm

ID: 14970 Ada pilihan


Bisa Back Order
Rp
1,300,000
PO-68MAG-0111
Magnetic tool holder / 1 pc
  • Type magnet : Neodymium
  • Size 38cm x 5cm x 1.4cm (tebal)
  • Berat produk ini 300 gram, Bisa menahan barang (perkakas) dengan berat maksimum 1.3kg

ID: 3091 Stok: 1
Rp
285,000
PO-KTMAIL01A1
Shinwa Calipers
A caliper is a device used to measure the distance between two opposite sides of an object. A caliper can be as simple as a compass with inward or outward-facing points. The tips of the caliper are adjusted to fit across the points to be measured, the caliper is then removed and the distance read by measuring between the tips with a measuring tool, such as a ruler.

ID: 10542 Ada pilihan


Bisa Back Order
Rp
110,000
TO-CUTW-G02A1
Square Cut Guide / 1pc
The most difficult part of cutting wood to length with a circular or jig saw, is accurately aligning the saw blade to our pencil mark. Unlike a standard square, the Square Cut Guide allowing you to instantly align your saw blade to the pencil mark and make perfect 90-Degree cuts, time after time.
No-slip rubber feet and a little gentle pressure hold the Square Cut Guide in place. Made of durable, impact resistant aluminium. Perfect for any brand of circular saw or jig saw.
Supports work pieces up to 150mm wide
Low-profile design won't interfere with saw
Weight: 250 gr

ID: 18802

Bisa Back Order
Rp
290,000
TO-CUTW-G03A1
Free Angle Circular Saw Guide / 1pc
  • Digunakan untuk alat bantu memotong dengan sudut tertentu. Sudut bisa di atur secara presisi
  • Bagian knob pengatur, mudah di kunci dan pada waktu di kunci tidak bergeser, sehingga sudut bisa tetap akurat.
  • Terbuat dari stainless steel (tidak berkarat), konstruksi cukup ringan, namun kekar sehingga presisi dapat di jaga biarpun untuk kerja lapangan.

ID: 15323

Bisa Back Order
Rp
350,000
TO-GAGE-025D2
Vernier Caliper (Nogisu) SHINWA brand / 1pc
This is a high quality and precision dial pocket and digital caliper series from Shinwa manufacture.
These caliper tools are designed as per the defined quality standards and quality tested by expert professionals to ensure zero defect in the products and are widely used in various industries like Automation, Cement, Chemical, Water treatment process plants and Construction.
Comprehensively used for measuring various parameters like, height, width, diameter and others of many small objects.

ID: 15308 Ada pilihan


10-14 d
Rp
98,000
TO-MARK-0002A
Scribe pen ( Kegaki pen ) / 1 pc
  • Guna : membuat tanda / goresan diatas metal, plastik, dan benda keras lainnya
  • Ujung (mata) bisa diganti

ID: 18601

Bisa Back Order
Rp
159,000
TO-MARK-0003A
Wing compass (divider) / 1pc
  • Industrial grade, very hard and sharp points. can be used to scribe circles, mark divisions (divide a given distance), or simply mark a distance.

ID: 10723 Ada pilihan


Bisa Back Order
Rp
189,000
TO-MARK-0003F
Compass Attachment
Dengan Compass Attachment ini anda dapat menggunakan pensil atau
peralatan tulis untuk menggambar proyek anda. Mudah penggunaannya
dan cocok untuk berbagai jangka.

ID: 22511 Stok: 1
Rp
176,000
TO-MARK-0011A
Marking tool : Ink line marker / 1pc
Japanese Ink Lines (Sumitsubo)
The Sumitsubo is one of the most important marking tools used by the master Japanese carpenter. Similar in function to the Western chalk line, it is used to mark thin, straight lines on wood and other materials. A fine silk line is drawn out through an ink soaked wad of cotton, tensioned and then snapped against the workpiece. This allows you to mark very long (up to 10 m), fine and exceptionally accurate lines. Can also serve as a plumb line.
  • With a sealed ink reservoir to prevent ink from leaking out or drying up.
  • Automatic spring-loaded recoil with locking mechanism.
  • Unbreakable plastic body and thread bob

ID: 18981 Ada pilihan


Bisa Back Order
Rp
100,000
TO-MSR-1101A1
Shinwa Stainless steel rules / 1pc
Ruler ( penggaris ) buatan Shinwa - Japan

ID: 15301 Ada pilihan


Bisa Back Order
Rp
39,000
TO-MSR-1101C1
Ruler stopper / 1pc
Stopper ini di pakai bersama dengan penggaris Shinwa (15301)
Merek lain, ada kemungkinan bisa dipakai juga, asalkan lebar dan ketebalan penggarisnya cocok.

ID: 15302 Ada pilihan


Bisa Back Order
Rp
85,000
TO-MSR-1101S1
Shinwa Stainless Steel Square rules / 1pc

ID: 15318 Ada pilihan


Bisa Back Order
Rp
97,000
TO-MSR-1102A1
Shinwa Sokutei Safety Cutter Guide / 1pc
Safety cutting ruler (penggaris untuk memotong dengan pengaman)
cocok untuk industri, maupun hobby craft.
Terbuat dari Aluminum yang kuat namun ringan.
Buatan Jepang.

ID: 15306 Ada pilihan


Bisa Back Order
Rp
1,180,000
TO-MSR-1103A1
Triangular Scales ruler / 1pc
Change units quickly and easily by rotating dial at either end of scale—no need to move the scale from the work surface.
 TopBottom
15 cm1/50·1/100·1/200·1/250·1/5001/300
30 cm1/100·1/200·1/250·1/5001/300·1/600

ID: 15315 Ada pilihan


Bisa Back Order
Rp
180,000
TO-MSR-1170A5
precision square ruler / 1pc

ID: 18792 Ada pilihan


Bisa Back Order
Rp
120,000
TO-MSR-1181A1
Miter Layout Gauge / 1pc
Make layout easier scribe perfect 45 and 90 cutlines at the same time! Ideal for picture frames, corner molding, and various box constructions, this precise gauge also works to prep saw blades or drill presses for angled jobs.
A balanced, wide-face design adds remarkable stability, while interior windows make marking parallel lines fast and easy. Made from polycarbonate.
Additional features:
  • Great for marking as well as angle checking
  • Windows in each face add versatility (ideal for marking parallels)
  • Three scales allow for precise distance measurement (metric only)
  • Weighs just 44 grams (roughly 3.2 ounces)
    ID: 18805 Ada pilihan


    Bisa Back Order
    Rp
    98,000
  • TO-MSR-1181A3
    Miter Layout Gauge ( Stainless steel ) / 1pc

    ID: 18806 Stok: 0

    Booking
    Rp
    199,000
    TO-MSR-1201C1
    Contour gauge ( stainless ) Shinwa brand / 1pc
    Copy and measure any irregular shape by pressing gauge against the contour to be copied. When removed, a perfect pattern has been produced for cutting, matching or checking dimensions. Ideal for fitting floor tiles and carpet around molding and pipes. Also used for checking wood parts against drawings.

    ID: 15303 Ada pilihan


    Bisa Back Order
    Rp
    330,000
    TO-MSR-1510A5
    Shinwa Protractor / 1 pc
    • Protractor profesional untuk keperluan mengukur sudut dengan teliti.
    • Bahan Stainless steel

    ID: 13576 Ada pilihan


    Bisa Back Order
    Rp
    120,000
    TO-MSR-1510D1
    Shinwa digital protractor
    Feature :
    Display digital untuk menampilkan hasil pengukuran
    Fungsi HOLD agar pengguna tidak lupa ukuran terakhir
    Batas ukuran :
    Angle : 0.0 ° ~ 359.9 °
    Length : 0 ~ 395mm
    Accuracy
    Angle : ± 0.3 °
    Length : 200mm ± 0.2mm or less
    ( Two of the range that does not cross a straight length portion)
    Minimum scale
    Angle : 0.1 °
    Length : 1mm

    Power : one lithium battery CR2032 ×

    Auto power off : about 5 minutes in a non-operation state

    Battery life : about 2,000 hours

    ID: 21505 Ada pilihan


    Bisa Back Order
    Rp
    950,000
    TO-MSR-5351A1
    Level
    • Berbagai macam LEVELer (untuk indikasi Level), buatan Jepang
    • Presisi dan praktis untuk berbagai macam kebutuhan

    ID: 15325 Ada pilihan
    Stok: 2
    Rp
    129,000
    TO-MSR-7111A1
    Hand held weighing scale / 1pc

    ID: 15331 Ada pilihan


    10-14 d
    Rp
    359,000
    TO-SWRL-191A1
    Shinwa Spring Tape Measure / 1pc
    • Auto Retractable Spring Tape Measure.
      ( when finished simply press the button to retract the tape.)
    • Flexing soft tape measure double sides ruler.( metric ruler )
    • Tape: Made of a fibreglass material
    • Tape length: 60” (1.5m)
    • Tape width: 8mm

    ID: 15312

    Bisa Back Order
    Rp
    79,000
    xx
    Manual Hand Tally Mechanical Palm Click Counter ( 4 digit Shinwa brand ) / 1pc

    ID: 20461 Stok: 2
    Rp
    120,000