Nama Chavant tentunya sudah tidak asing bagi yang berkecimpung dibidang sculpting. Diperuntukkan bagi para profesional agar dapat menuangkan karyanya dengan hasil semaksimal mungkin.
Berfungsi untuk bermacam kebutuhan polymer clay sbb :
Premo Sculpey is a professional quality modeling clay that bakes in any home oven. Premo Sculpey quickly reaches a workable state with minimal conditioning and remains soft and pliable while offering extra resistance without crumbling. Mix Premo Sculpey with other polymer clay colors, powders or pigments for interesting colors and textural effects. Premo Sculpey should be cured at 275º F (130 C) in a preheated oven for 30 minutes per quarter inch of thickness. DO NOT MICROWAVE. Once cured, the colors intensify and deepen. Hint: Conditioning of all polymer clays may be facilitated with the use of a pasta machine. Simply cut the block in half and feed each half through the largest setting. Repeat 10 times more and your clay should be conditioned.
Create bangle bracelets, cuff bracelets, and curved components using the Artistic Wire 3D Bracelet Jig! Design perfectly round, continuous, all-in-one bracelets in 3 dimensions using wire, stones, and beads with this unique jig - even make curved design components for bracelets and earrings. Includes one Round Jig base with evenly spaced rows and columns of holes and 20 Removable Pegs & 20 Peg Fasteners. Plan your design by inserting each peg into the outside of the jig and secure it by attaching the fastener from the inside. Then, wrap your wire to create your design. Remove the design by pulling the pegs off the jig and slide the design off. The design capabilities are virtually limitless! Creates a 2.75 in (6.9 cm) diameter design that fits most wrists. You can also stretch your designs slightly to make a larger or smaller diameter if desired.
Ranger is delighted to announce an inspiring collaboration with Vintaj to create new metal Patinas! Vintaj Patinas are opaque inks specially formulated by Ranger to adhere to metal. They create beautiful and durable patina effects. The Patinas will colorize Vintaj natural brass findings and filigrees for gorgeous jewelry and embellishments. Available in a palette of 15 hues, the Patinas can be blended and layered to create endless patina effects. Sold in sets of three, the color combinations were developed to mimic natural patinas that would occur over time.
iCraft deco foil Adhesives
A generous jar of natural mica fragments will provide your artwork with a pearly sheen. Apply generously over any adhesive. Random large fragments may be crushed for smaller particle size. This package contains 0.67 ounces/19g of mica fragments.
Create a glossy, opaque effect on any glass surface. Fine tip allows for quick and easy application. Use for painting, silkscreening and outlining on glass surfaces. Weather resistant for indoor and outdoor use. Non-toxic. Permanent. Dishwasher safe on glass.
Border punch ini bagian atas (penekan) dapat dilipat dan dikunci hingga rata, sehingga mudah dan rapi disimpan dilaci.
Now ... Hematite color only.
Lubrication For Cutting Tools. Easy To Use Push Up Tube. High-tech lubrication for most cutting applications including burs, drills, gravers, and sawblades. Use when sawing, drilling, or drawing wire to insure cool, clean cuts. Cut lube adheres to the tool surface and is less affected by heat than oil. Not only does Cut Lube make cutting easier and more precise, but it adds life to all of your cutting tools. The two ounce stick is made in the USA and comes in a convenient push-up plastic sleeve. Measurements: 2 oz. Tube is 3 inches tall. 1 3/8 inch diameter application surface.
Ini adalah alat untuk mengasah (menajamkan) pisau potong bentuk bulat (rotary) Cara pakainya gampang. Letakkan pisau rotary anda di atas batu gosok, dan menggunakan penjepit yang tersedia putarkan satu arah (jangan bolak balik)Dalam sekejap pisau anda akan kembali tajam. Tersedia 3 macam ukuran.
A tool for cutting plastic plates. If the attached plate is set, cutting in horizontal and vertical directions and cutting at any angle can be performed accurately. Standard blade 0.3mm is set. It is possible to replace it with an optional spare blade (0.25mm thickness).
EZ-STRIKE Metal working hammer includes a fixed steel head plus interchangable nylon and brass heads (third head stores on handle end). A coated handle helps reduce vibration. Total tool weight: 35 ounces.
A dapping block and punch are used to form soft metals* into a dome shape. ImpressArt’s Dapping Kit has one curved depression that can easily add a domed effect to stamping blanks up to 1 ¼” in diameter. The depression provides a scratch-free, non-marring surface that produces an even, smooth curvature to pendants and more intricate designs. Its multi-storage options allow the dapping block and punch to be stored upright on top of a workbench or flat inside a drawer. To use, simply place stamped blank inside depression and hold punch in center of blank. Then strike punch with a metal stamping hammer until blank is domed. *Rated for stamping on soft metals: Alkemé, aluminum, pewter, copper, brass, silver, and gold.
