• Bokuchi Suzuri tempat (biasanya terbuat dari batu atau ceramic), untuk menggerus "ink stone" dan dipakai sebagai wadah tinta.
  
• Double side (2 sisi), terbuat dari keramik.
• Ukuran : W89×D26×H149mm

• Tinta sumi yang cocok untuk pemula atau untuk latihan.
• Note : produk ini sering bungkusnya ganti ganti, jadi ada kemungkinan tampak bungkus berbeda , biarpun barangnya sama , asli dari Jepang.

• Tinta sumi buatan Kuretake Japan

• Tinta sumi buatan Kaimei Japan

Gofun is an opaque white pigment made from pulverized high quality oyster shells. It has a pearl like luster. Used in traditional japanese doll making, and also often splashed on a print to imitate effects such as snow in a three dimensional manner.
It is made from natural clam shell, by allowing Oyster shells to decompose until all organic matter is gone then grinding the remaining shell. Nowadays there is only one or two traditional manufacturer left doing this.
Mix Gofun with melted NIKAWA (Japanese traditional glue id.16672) and using brush for applying to doll/goods.

Gofun is a white pigment, used in Japan from the Muromachi period to the present day. Gofun was made of calcium carbonate powder obtained by heating and pulverizing the shells of oysters and clams, collected around the Inland Sea coast. It was used alone, or mixed with other pigments (guiri) to lighten the colour tone. An example is cinnabar mixed with gofun, called shu-no-gu (cinnabar-shell). In woodblock prints (ukiyo-e), gofun was sometimes rubbed directly on the picture surface, or sprinkled to give the effect of falling snow. Mixed with animal glue (nikawa), it was used as a coating on paper gubiki, an adhesive for sprinkled gold dust (fundami), and a priming (doroji), on statues and masks after the Kamakura period.
These type of Gofun is ready-to-use
When using it, you don’t need to grind, Just add warm water.
It is very easy to use and gives you the same quality of gofun (id.12257).

Superior Quality Shell White.

• This paste type of gofun is already contains Nikawa.

1. Take needed volume and put in a small container.
2. Put some water approximatelly half to same volume of the Gofun
3. Using some brush , stir well.. and ready to use ( just like ordinary painting )
4. If you want to make it more thinner , you can put some more water and MORE nikawa (NOT just water).

• Waterbased Acrylic Polymer Emulsion coat for clay doll and modeling cast doll finish. Finish color is clear. Doll skin becomes matte texture with the first coating. Repeat coating for a few times and the skin becomes clear tranparent complexion. After the coating, you can make-up with color paints. Once the doll finisher either clear or gohun is coated on the skin, you can fix doll face make-up. Use a marketed painting oil for wipe lines off, and adjust the lines.