Make your own molds, using only hot water!
Great Japanese moulding material which is re-usable, so you can keep using it for different mould shapes. Perfect if you need to make lots of moulds but only need to use each to create few copies. Picks up detail surprisingly well.

• Dip a piece of the oyumaru in hot water (approx: 80 degree C) for about 3 to 5 mins. Take the Oyumaru out of the water with a pair of tongs and wipe it dry with a towel.
• While it is still soft, press the material you wish to mold into the Oyumaru. If the Oyumaru gets hard while you are working with it, place it back in the water and begin the process again.
• Allow Oyumaru to cool down, remove your object and your mold is ready.
• Oyumaru is reusable.
• Material : SBS no hazardous material compound (non PVC), conforms to safety requirements of ASTM D-4263 and EN71

Make your own molds, using only hot water!
Great Japanese moulding material which is re-usable, so you can keep using it for different mould shapes. Perfect if you need to make lots of moulds but only need to use each to create few copies. Picks up detail surprisingly well.

• Dip a piece of the oyumaru in hot water (approx: 80 degree C) for about 3 to 5 mins. Take the Oyumaru out of the water with a pair of tongs and wipe it dry with a towel.
• While it is still soft, press the material you wish to mold into the Oyumaru. If the Oyumaru gets hard while you are working with it, place it back in the water and begin the process again.
• Allow Oyumaru to cool down, remove your object and your mold is ready.
• Oyumaru is reusable.
• Material : SBS no hazardous material compound (non PVC), conforms to safety requirements of ASTM D-4263 and EN71

Bahan ini fungsinya sama seperti "Oyumaru"
Kalau di masukkan ke air panas (sekitar 70-80 deraja), bahan ini akan menjadi lunak, dan bisa anda bentuk ( biasanya untuk membuat MOLD / cetakan).
Kalau menjadi dingin akan menjadi kenyal (sperti karet)
Tentu saja bisa di ulang ulang, dimasukkan ke air panas jadi lunak lagi, sehingga bisa dipakai berulang ulang.

Easy-to-use modeling pellets that soften in warm water for sculpting or pressing into molds.

Heating instructions for Friendly Plastic® Pellets:

1. Heat water in electric skillet until temperature reaches 140°F (60°C) to 150°F (66°C) for about five minutes. Set control to 150°F (66°C) or less. Most electric skillets have a low/simmer setting. Test with cooking thermometer. Add one or two drops of cooking oil to water to prevent sticking.
2. Pour Friendly Plastic® pellets into the hot water. Let set in water for about 30 seonds at 150°F (60°C) to 60 seconds at 140°F (60°C) until transparent. Pellets will stick together. Wet hands and remove from water.
3. Shape with your hands or press into a mold. When the desired shape is formed, place into cold water for three to five minutes. Place back in hot water for further shaping.

Ini adalah bahan Thermoplastic dengan campuran ceramic yang dapat dibentuk dengan mudah (apabila dimasukkan kedalam air panas) serta dapat digunakan berulang kali.
Contoh kegunaan :

• Membuat pegangan plier / alat sesuai dengan bentuk tangan anda, sehingga terasa lebih nyaman dipakai.
• Membuat kepala hammer (palu) yang sesuai dengan kebutuhan, misalnya untuk mengetok wire biasanya diperlukan kepala palu yang terbuat dari Nylon. Nah...dengan bahan ini anda dapat membuat kepala hammer / melapisi hammer yang ada sehingga didapat kepala hammer nylon.
• Untuk membuat JIG (alat bantu pegangan) pada waktu mengerjakan sesuatu (misalnya menyolder jewelry)
• Membuat cetakan (dies)
• Masih banyak sekali yang anda bisa gunakan dengan bahan ini...dan bisa berulang ulang.