Make your own molds, using only hot water!
Great Japanese moulding material which is re-usable, so you can keep using it for different mould shapes. Perfect if you need to make lots of moulds but only need to use each to create few copies. Picks up detail surprisingly well.

• Dip a piece of the oyumaru in hot water (approx: 80 degree C) for about 3 to 5 mins. Take the Oyumaru out of the water with a pair of tongs and wipe it dry with a towel.
• While it is still soft, press the material you wish to mold into the Oyumaru. If the Oyumaru gets hard while you are working with it, place it back in the water and begin the process again.
• Allow Oyumaru to cool down, remove your object and your mold is ready.
• Oyumaru is reusable.
• Material : SBS no hazardous material compound (non PVC), conforms to safety requirements of ASTM D-4263 and EN71
• Option
  
  
• Oyumaru 300 : 1 box 7 pcs mix color.
• [Color]
• Sky blue, orange, yellow, leaf green, sparkle white, purple, pink
• [size]
• Cerise bag included: 120 x 125 x 35mm
• Rubber size: 58 x 15.5 x 8mm

Bahan ini fungsinya sama seperti "Oyumaru"
Kalau di masukkan ke air panas (sekitar 70-80 deraja), bahan ini akan menjadi lunak, dan bisa anda bentuk ( biasanya untuk membuat MOLD / cetakan).
Kalau menjadi dingin akan menjadi kenyal (sperti karet)
Tentu saja bisa di ulang ulang, dimasukkan ke air panas jadi lunak lagi, sehingga bisa dipakai berulang ulang.

Make your own molds with this unique material. It can also be used to soften and condition clay when mixed with clay.
This package contains one 8 ounce block of mold maker.
Bake at 275 °F (130 °C) for 15 minutes per 1/4 in (6 mm) thickness.

In just two minutes, you're ready to make perfect reproductions in perfect detail. Works with virtually any casting medium.

Mix-a-MoldTM makes it easier than ever before to make perfect reproductions of three dimensional objects. Mix-a-MoldTM is fast and fun and picks up every detail. Supplied in powder form, it mixes with water and the mold is ready in two minutes. Fill the mold with any other casting medium.

Dengan bahan ini anda dapat membuat MOLD sendiri.

• Terdiri dari 2 bahan (A.putih dan B.purple total 30 gram) yang harus anda campur (di ulenin) hingga merata.
• Lalu Tekan (press) keatas permukaan benda yang ingin dibuat cetakannya.
• Dalam waktu 15-30 menit campuran ini akan mengeras menjadi semacam karet cetakan (tidak usah di oven).
  Note : sekali mengeras, tentu saja tidak bisa di buat lunak lagi, untuk membuat mold model lain.
• Hasil cetakannya agak fleksibel (silicon rubber)
• Working time 2 menit (selang waktu kerja)
• Cure time 15-30 menit (jangka waktu hingga mengeras)
• Penyusutan : 0% (hampir tidak ada penyusutan)
• Tensile strength : 400 psi
• Tear strength : 55 ppi
• Elongation : 375%

Apoxie® Sculpt is a non-toxic, two-part sculptural epoxy ideal for creating pavé jewelry designs. Super white color offers a crisp white base for embellishing.

Combining the sculpting benefits of clay with the adhesive power of epoxy, Apoxie Sculpt epoxy secures SWAROVSKI ELEMENTS flat back and chaton crystal rhinestones for sparkling jewelry creations. Also adheres to cabochons, crystals, glass, plastic, metal, wood and more.

Castaldo Quick-Sil is a two-part RTV (room temperature vulcanizing) silicone molding putty that produces strong production silicone rubber jewelry molds. The easy-to-use putty works great for lost wax casting and can also be used for direct casting of low-temperature metals such as pewter and tin. Simply mix equal amounts of Part A and Part B to produce finished jewelry molds. With a 1-2 minute working time, non-toxic Quick-Sil molding compound has a cure time of only 15 minutes with 0% shrinkage. Great for use with Art Clay®, BRONZclay™, COPPRclay™, Apoxie® Sculpt and Kato Polyclay™. Includes instructions. Made in the USA.

EasyMold Silicone Putty is ideal for a wide range of impression type mold applications, including Castin’Craft Clear Casting Resin, EasyCast Clear Casting Epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals! EasyMold is a easy to use, Odor Free, Non-Toxic, FDA compliant – Food Grade, two component silicone putty.

Make your own molds for resin, food, soap, wax, clay and more with this amazing mold putty. It is quick, easy and safe. The entire process takes less than 25 minutes. It is food grade and FDA compliant. It requires no equipment, cups or stir sticks. Simply measure and mix by hand.

This is a 2 part Silicone moulding compound for making molds in Japan.
Use this very high quality moulding compound to make a mould from your favourite button, piece of jewellery, seed pod, shell or other interesting texture. Then press your metal clay into the mould to create a fine silver replica. This 2 part product is very easy to work with, it mixes easily, and is nice and flexible after curing so it is easy to get your dry clay out of the mould. Picks up fine details so excellent for fingerprints.

Mix equal amounts from each 10-ounce jar blending the putty until it is all one color then press a finding or shape into the putty and leave for 5-minutes. Putty will set up and still be flexible enough to release the finding. Use the new mold over and over with metal clay.

The life of the product lasts approximately 6-8 months after the container is opened.

• This is a food-grade alginate, a water-based skin-safe molding powder, to cast hand molds, or.. other things.
  This Alginate molding compound forms a rubbery elastomer within minutes of mixing with water. Captures impressive detail, while being flexible enough to prevent entrapment of the hand. It dries and shrinks over time.

• #M-8012 : ini adalah type standard yang sering di pakai.
  Pilih ini kalau anda tidak perlu kebutuhan khusus.
• #8520 : tipe ini hasilnya tembus pandang ( agak bening )
  kalau anda ingin membuat cetakan untuk resin bening, biasanya pilih ini, karena anda harus mengecek apakah hasil cetakan resinnya ada gelembung udara atau tidak.
• SLJ3266 : ini type High Strength , di perlukan kalau cetakan anda harus sering di bentang ( direnggangkan ) , biasanya untuk cetakan 3 dimensi yang berbentuk rumit .