Sangat berguna untuk menjepit sementara ujung dari untaian beads agar selama pengerjaan tidak mbrodol lepas.

Praktis untuk meng KLEM ujung benang / kawat / senar pada waktu mengerjakan beads dll.

Available in 2 options : Jaw opening 25mm and 40mm

Mudah di atur jarak cengkamnya, di perkecil tinggal di dorong, lalu di tekan grip nya agar kencang, dan untuk di buka tinggal di tekan tombol di bagian bawahnya
Bisa di balik , sehingga fungsinya berubah dari cengkam menjadi alat pe renggang.

A clever variation on a spring clamp, the unique design of this variable capacity clamp lets you create an infinite range of openings up to 4" (100mm), with constant, firm pressure at all openings. The top jaw slides easily with one hand, and it grips firmly on the notched rail to ensure a firm grip at all settings. The variable opening also controls the pressure. For lighter pressure, click jaws wider than your work; for maximum pressure, click jaws down to a smaller opening. The soft pivoting pads provide a firm grip on your work while remaining gentle on your work surfaces. The large ergonomic handles are easy to operate at any and all openings with their nonslip inserts for a firm, safe grip.

• Eliminates the need to carry around bar clamps or pipe clamps
• Clamps can be inserted and repositioned anywhere along a 2"x4"
• 400 pounds of clamping force and up to 850 pounds when bolted to a 2"x4"
• Non-mar pads to protect work surfaces

Ini adalah vise ( alat cengkam ) untuk melubangi batu (atau mutiara dll) berbentuk bulat. Anda perlu alat ini, karena untuk melubangi benda bulat, harus di bor dari dua arah (bolak balik), karena kalau hanya dari satu arah akan resiko pecah / gumpil di sisi baliknya.
Dengan alat ini, anda cengkam benda bulat yang mau di lubangi, lalu di bor hingga setengah ( separuh dalamnya) , lalu tuas di balik 180 derajat, dan di bor dari arah baliknya. Dengan alat ini , maka arah lubang bolak balik tersebut akan pas ketemu di tengah.
Note : yang di jual adalah alat cengkam (lihat gambar atas ), tentu saja tidak termasuk alat bor . Anda pasang alat cengkam ini di mesin bor anda sendiri.

• Fungsi : mengatur posisi ( X, Y) secara tepat waktu mengerjakan proses drilling / milling atau pekerjaan lain yang perlu akurasi.
  
• Material Aluminum Die cast
  
• Note : sudah berikut CLAMP ( lihat bagian option )

Include 1 tweezer.

The two adjustable arms with alligator clips can be adjusted to any position to hold small items. Cast iron base.

The two adjustable arms with alligator clips can be adjusted to any position to hold small items. Cast iron base.
Include 63mm dia. magnifying lens with 4x power
Made in China

The two adjustable arms with alligator clips can be adjusted to any position to hold small items. Cast iron base.
Include 63mm dia. magnifying lens with 3x power
Made in India

Tool clipper essential for precision work! It is called a third hand and it is becoming an arm of a professional. There are 3 joints and hold firmly in the position you like. If you use two, you can use both hands freely, so you can work more accurately and efficiently.

This third hand type kit features many different clamps and configurations. Great for model building, electronics, etc. It can be clamped to a table or bench and allows for unlimited and very flexible work holding options.
This clamp set is perfect for holding wires during soldering or small parts during assembly.

Clamp (vise) untuk memegang cincin (atau benda kecil lain)
Terbuat dari Kayu

Hold rings securely from the inside or outside! Slip ring over the stepped;end and tighten the thumbscrew to work on the outside of the ring (using it;as an inside-ring clamp); turn it around to use it as an outside ring clamp.;Length: 5-1/4" (133mm)

Made in Korea