EcoZai A1 adalah bahan yang terdiri dari 2 buah komponen yang akan menghasilkan campuran "Composite" yang kuat terhadap cuaca (air dan panas) dan relatif ringan dibanding Cement, dan aman terhadap badan maupun lingkungan.
This is a water based coating to protect the product against moisture and to give the product a weather resistant quality. A1 Sealer PLUS is a concentrated solution of acryl polymers in water. Always add 30% water to A1 Sealer PLUS before use. The work surface must be free of wax, oil, dirt and dust. Apply the sealer with a brush, roller, brushing with a soft cloth or with a spray. A1 Sealer PLUS can be applied in one or more layers to improve the protective qualities of the layer. A second layer can be applied after 45 minutes, depending on the temperature and humidity. When applying the sealer with a soft cloth, one layer of A1 Sealer PLUS will result in a satin matte gloss. More gloss is achieved by applying several layers. We recommend inspecting the treated surface every year and if necessary re-treat it with A1 Sealer PLUS every 6 years. This creates an expected life span of the A1 object of 50 years. There is a choice of A1 Sealer PLUS Matt and A1 Sealer PLUS Satin. For the most matt result, we recommend applying a layer with the A1 Sealer Satin first and then a layer with A1 Sealer Matt. The advantages are: - one component - free of solvents - water-based - quick drying - easy to apply - good UV-resistance - excellent adhesion - dirt resistant and water resistant
EcoZai A1 release agent / 1pc EcoZai A1 release agent is a petrolatum based wax formulated specifically to release EcoZai A1 casting/laminating products from either plaster or from cured EcoZai A1 itself. It also maybe used as a release agent for rigid polyester molds. Application Apply to a plaster or EcoZai A1 Using Foam brush or cloth, apply into the “grain” of the mold. Then, using asecond, clean piece of terry cloth, rub off the wax leaving a thin film.Repeat the above procedure for a second time. Please note: DO NOT use to much (too thick), excess can cause“pocketing” of the gel coat and will decrease releaseproperties.
What is Basalt Rebar ? Nowadays, in the construction sector the biggest problem is the corrosion problem of the steel rebars. Environmental conditions and sea water are causing for corrosion on the steel rebars by time. Due to these reasons with the time damages occurs on the constructions and this is causing to huge maintance costs, especially the structures which are affected by the outdoor conditions like, parking places, ports, bridges and their legs. Basalt rebars are resistant according to corrosion and due to the high pulling strength, it will be an excellent alternative to traditional steel rebars. Basalt rebars are little bit more expensive than regular steel rebars but due to its advantages, like no maintance cost, light weight etc. becomes more favoured to normal steel rebars.
What is Basalt Fabric (cloth)
Poraver : EXPANDED GLASS GRANULES Lightweight aggregate made of recycled glass. lightweight aggregate with bulk densities starting at 190 kg/m³ is 100 % mineral, free of broken grains and available in different grain sizes from 0.04 mm to 4 mm. With Poraver® expanded glass, industrial products become more lightweight, more economical and easier to work with. The unique combination of positive features and benefits makes Poraver® versatile.
ArtResin adalah "Non Toxic High Gloss Epoxy coating" terkenal dan terbaik dari USA. Kelebihan produk ini :
Material : Clear Silicon resin Cocok untuk membuat miniatur benda yang mirip air (atau kuah, sup dll), atau Jelly dll. Untuk memberi warna, gunakan "INK" bukan paint. Karena bahan ini terbuat dari silicon, maka kalau bisa gunakan Oil based ink (bukan water based ink) agar warna bisa tercampur lebih rata. Sebelum kering cairan resin ini kental seperti sirup dan sesudah kering tidak langsung memadat tapi permukaan yang terkena udara akan agak kenyal dan lengket selama 5 hingga 7 hari kedepan. Selama jangka waktu itu resin bisa ditambahkan diatasnya.
Material : Clear Epoxy resin Non-toxic ICE Resin® two-part formula dries and stays crystal clear, never yellowing or breaking down. The versatile and easy-to-use jeweler's grade formula can be used with bezels, creating a clear dome as it covers and magnifies the image inside it. Mix the resin with sand, grass, sticks, paper and metal objects. Create freestanding projects or use a mold to make dimensional pieces. The package includes Part A Resin (4oz), Part B Hardener (4oz), stir sticks, measuring cups and instructions. Dries in approximately 6-12 hours in 72-degree temperatures. Neat and easy clean-up.
Padico UV Resin "Drops from the Sun" is transparent resin gel which cures when exposed to ultraviolet rays. The resin has been improved in quality with high transparency and stronger adhesiveness. New Padico resin has three hardness: Hard, Soft, and Gummy. You can choose one suits for your piece. The new resin has two main characteristics. Can be mixed two types of resins and make your hardness resin. Can be used different types for different purposes in a piece. Unlike 2-part epoxy resins, Padico resin is "ready for use", no mixing required. Use just the amount you need without waste resin and time. Padico resin gives a very clean, transparent look and has outstanding hardness properties. New resin has three hardness types: Hard, Soft, and Gummy. You can choose the hardness for your piece.
Padico UV Resin "Star Drops" is transparent resin gel which cures when exposed to ultraviolet rays - or LED lamp Major characterristics are:
Labyrinth Glitter set has 3 different colors' sets
A liquid coloring agent exclusive for transparent resin (UV resin). Because it is liquid, it is easy to mix with resin liquid, coloring is beautiful. You can change the color intensity depending on the amount to be added, or mix colorants to create your favorite color. It can also be used with two-component resin.