Anvil ini biasanya digunakan untuk tatakan pada waktu melempengkan (membuat gepeng) kawat atau benda lain yang perlu di palu. Bagian lancipnya, untuk tatakan mengetok benda yang melengkung (lihat gambar). Made in Japan.
For forming and raising, this 12pc Mini Stake Forming Set is perfect for small-scale projects. Stakes are made of hardened steel and polished to a mirror finish. Set includes:
Heavy-duty metal forming stakes allow the user to form both synclastic and anticlastic shapes.
With this Steel Riveting Block, there is no more guesswork on the length of wire to be cut. Use the holes at the top to pre-cut the perfect length of wire for your projects. The holes in the middle are about 1.8mm deep, thus every cut is just the right amount of wire needed to create "head" on both sides. The dimples on the left side are used for support when riveting in order to hold the shape of the rounded rivet head. The circles on the right side are for riveting eyelets in 3 different sizes without flattening the rounded rims. Dimples on the side of the block are for rivets and on the opposite side are circles for eyelets. Both of these sides are for CURVED surfaces and must be mounted in a vise.
hex anvil is the perfect base for drilling, staking and riveting.
This block has a variety of grooves including semi-circular and "V" shapes for forming and shaping. It is case hardened, Use with a riveting hammer or dapping punches to help shape the the metal you are working with. Helps to form folds and curves.
A dapping block and punch are used to form soft metals* into a dome shape. ImpressArt’s Dapping Kit has one curved depression that can easily add a domed effect to stamping blanks up to 1 ¼” in diameter. The depression provides a scratch-free, non-marring surface that produces an even, smooth curvature to pendants and more intricate designs. Its multi-storage options allow the dapping block and punch to be stored upright on top of a workbench or flat inside a drawer. To use, simply place stamped blank inside depression and hold punch in center of blank. Then strike punch with a metal stamping hammer until blank is domed. *Rated for stamping on soft metals: Alkemé, aluminum, pewter, copper, brass, silver, and gold.
Terbuat dari kayu keras (cukup keras, namun tidak membuat permukaan metal tergores). Gunanya sebagai tatakan ketokan. Untuk membuat plat rata menjadi cembung / berbentuk (biasanya untuk kerajinan perak, emas dll ).
Wood dapping punches are used with dapping blocks to shape and create a domed surface on metals. Wood will not scratch or mar the surface of precious metals, and provides a nice, even curvature to pendants and more intricate designs. Easy to use: all you need is a dapping punch and block, a rubber mallet, and a non-slip surface.
Satu set lengkap terdiri dari "dapping block" 5x5x5cm and "punch" yang sesuai (pasangannya) sebanyak 24 buah
This steel mandrels designed for ring making and forming, can also be used for a variety of other metal working tasks. Used for shaping, straightening, and enlarging rings. also for gauging and holding the ring during stone setting. all are made of hardened tool steel. Professional quality.
Introducing the 360 degrees Mandrel Vise. This set includes our hardened steel, chromed ring mandrel, which measures 11 1/2 inches long and accomodates sizes 1 through 15. Unique ball and socket provides 360 degrees swivel/pivot as well as horizontal position with a locking mechanism to hold firmly at any angle, making it especially great for wireworking. This set allows you to work hands free, holding the mandrel for you when both hands are needed. The vise may be clamped to most benches or table tops with an opening up to 2 1/8 inches.
BANGLE MANDREL HARDWOOD Great for forming, shaping and even removing dents from bracelets or bangles made of a softer metal. Measures: 15 x 2.5 inch. Made in India.
This polished, high-quality cast-iron mandrel is ideal for shaping and forming bracelets. Built-in tang allows you to secure the mandrel in a vise for sturdy support while you work.
Simple and functional, this innovative bracelet mandrel holder keeps your mandrel in place as you work. The holder features a rotating assembly, allowing you to clamp the mandrel in place yet rotate it as you form your bracelet. Mount the plate to the front of your bench or other wood work surface, slide the pin into the U-shaped pocket, then lock your bracelet mandrel into the fitted square holder using the two set-screws.
Digunakan untuk dudukan / tatakan pada waktu mengerjakan proses pengikiran / pemotongan, pengerjaan produk jewelry. Type : di klem ke pinggiran meja
