- Instructions
- Mix equal parts of A& B for at least 4 minutes.
- Adhere to desired surface.
- Affix decorative pieces.
- Let cure in horizontal position for 24 hours.
- Important Information or Helpful Hints-
- This product is pliable for 90 minutes.
- If product is too hard/clumpy, remove the hardened clay from the case; microwave it for 2 sets of 5 seconds.
- If properly sealed, product can last until you dispose of it.
- This product is non-toxic and is not a toy; please keep away from children.
- No Shrinkage after 100% cured.
- Keep container tightly closed when not in use.
- Keep product out of direct sunlight, humidity or temperatures higher than 113F (45C) or product may not cure properly.
- Precautionary Statements-
- Not for use by children, keep out of reach of children.
- Wash hands after use.
- Avoid ingestion.
- Use window exhaust fan or similar device to remove vapors and ensure adequate cross ventilation.
- Avoid eye and/or sensitive skin contact.
- Wear gloves and eye protection.
- Avoid breathing dust.
- Contact with skin may cause allergic reaction in susceptible individuals.
Setting (mounting) suitable for clay click here