This flexible shaft machine has a very powerful 1/4hp motor that is perfect for polishing, sanding, drilling, cleaning and more. Great for hobbyists and craftspeople. It has a carry case making it great for travel and shows. It features...

• A powerful 1/4hp motor with flexible shaft
• #30 style Jacob's chuck handpiece
• A chuck key
• Replacement pair of motor brushes
• Electronic variable speed foot control
• Maximum speed of 22,000rpm
• Ball bearing design
• Works other brand's "standard" handpieces
• Hard plastic carry case
• Made in China

• Alat ini adalah sebagai PENGGANTI ujung standard yang biasa di pakai di alat Flexible shaft polisher (lihat Produk yang berkaitan di bagian bawah halaman ini).
  Jadi.. alat ini TIDAK BISA di pakai sendiri, anda harus sudah punya Flexible shaft
• Alat ini chuck nya KHUSUS, hanya bisa cocok dng mata yang punya diameter 3/32 inch (2.35 - 2.4mm). ukuran 3/32 inch ini adalah standard yang banyak di pakai di mata gerinda untuk jewelry.

Telescoping hangers will extend 42 above your workbench. Height adjustments are made easily with the thumbscrew. Made with a solid mounting base or clamp and a 10 swing arm. Bench clamp model.

This Boley style jewelers sliding gauge gives quick measurements of inside or outside diameters in millimeters. You can even measure mounted stones! Made of stainless steel it can measure 0-100mm; features knurled locking screw, notched jaws and Vernier gauge.

• Made of stainless steel
• Notched jaws for inside/ outside measurements
• Can measure mounted stones
• Locking screw and thumb slide
• 0-100mm Vernier gauge
• Size: 5-3/4" inches (145mm)

Introducing the 360 degrees Mandrel Vise. This set includes our hardened steel, chromed ring mandrel, which measures 11 1/2 inches long and accomodates sizes 1 through 15. Unique ball and socket provides 360 degrees swivel/pivot as well as horizontal position with a locking mechanism to hold firmly at any angle, making it especially great for wireworking. This set allows you to work hands free, holding the mandrel for you when both hands are needed. The vise may be clamped to most benches or table tops with an opening up to 2 1/8 inches.

Digunakan untuk dudukan / tatakan pada waktu mengerjakan proses pengikiran / pemotongan, pengerjaan produk jewelry.
Type : di klem ke pinggiran meja

The combination of our Quick Coiler with coiling mandrels and the Jump Ringer Cutting system allows you to make hundreds of jump rings in just minutes. Easy and safe to use. Simply coil the wire on the mandrel using the power coiling drill. Then insert the coil in the coil holder. Use the included cutting attachment and blade with your flex shaft -#30 style handpiece recommended- to cut precision jump rings in the wire and color of your choice. Kit includes drill eight 6 long mandrels in sizes 1, 2, 2.5, 3, 4, 5, 6 and 8mm, 6 inch coil holder and cutting attachment with blade and blade arbor. Please note: Handpiece not included.

Make a perfect measured square loop every time with Acculoop2! Jaws clearly marked with measurements for making loops that range from 2-8mm. Length 6-1/2".

Double Cylinder Bracelet Pliers have two different sized cylinders which are used to quickly put large radius curves into flat metal stock. Result can easily be resized on mandrel if desired. Perfect for making mens' and womens' bracelets.
Length: 165mm

Put a clean, consistent radius curve into flat metal stock with our 3/4" (19mm) and 1-3/8" (35mm) Miland Channel Ring Maker pliers. Can easily be resized on a mandrel. Engraving or designs can be added to flat stock before forming with the worry of marring the metal when forming.

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the hooked jaw at the exact spot you wish to drill. Squeeze the plier to create a dimple. The ergonomic design requires little force. The hooked jaw allows easy reach into tight spots. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the hooked jaw at the exact spot you wish to drill. Squeeze the plier to create a dimple. The ergonomic design requires little force. The hooked jaw allows easy reach into tight spots. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

• Anticlastic pliers
  Anticlastic pliers are similar to synclastic but produce a curve in opposite ways in two directions (saddle-shaped). Produces a fine, finished product in a fraction of the time without having to use a dapping tool. Total length: 8".
• Synclastic pliers
  Synclastic pliers put a curve toward the same side in all directions. Create a bracelet in minutes, not hours. Also makes rings, bangles and is indispensable in doing jewelry repair. Length 8".

The compound-action handles are coupled to jaws that remain parallel throughout their range of movement.
Equipped with return spring.
Overall Length: 5.5" (140 mm)

Give a new twist to your designs with our new Parallel Action Zig-Zag Bending Plier. This simple to use parallel plier reduces repetitive wrist motion and saves time because it creates several zig-zags all at once. Simply place the wire in the jaw and squeeze - instantly you have one inch of uniform zig-zag design. Move the wire over to easily continue the zig-zag pattern in the desired length. Use on 20 gauge or lighter soft wire, 24 gauge or lighter soft metal blanks and even stringing wire! Head and jaws are made of high grade steel for years of use. Length 5-1/4" (135mm).

Tang #1 ini cocok untuk menutup kuku penjepit batu, dimana bentuk ujung tangnya melengkung sehingga dapat menjangkau bagian yang sulit di jangkau oleh tang biasa, dan bagian bawahnya yang melengkung dapat menahan batu dari bawah sehingga tidak merusak bagian pinggir dari cincin atau perhiasan lainnya.

The #2 Plier is especially helpful to set or tighten side stones in a basket setting as well as other type mountings. One side of the plier has a slot for the wire under the stone and the other side has a beading tool cup on it. Also great for setting earrings! Simply slip the post through the slotted side and bring the beading tool down on the prong making this type of work much quicker and easier for jewelers.

If you need a larger tip you can sand it down slightly and use a small ball bur to enlarge the size. If you need to make it smaller, just sand the outside of the tip slightly.

• Perfect for setting and tightening accent diamonds surrounding color center stones.
• Great for earrings, with or without under bezel wires.
• Size of beading cup can be made smaller or larger.

The #3 Plier is invented by a stone setter, can be used by jewelers for setting virtually any size stone. The top (bent) jaw has a concave hole, which works great on prongs or pavé set stones. The straight jaw is milled so that the plier can be used on normal mountings as well as basket mountings and many more.
Made of high grade stainless steel with cushion grips, these pliers can save jewelers a great deal of time when repairing or setting stones.
Length is 140mm.

A unique design, specifically for closing prongs on tennis bracelets quickly, efficently and properly.
The angled jaw allows the user to properly bend the prong, making every setting job much easier than conventional pliers.