Search page kw=Keywords: forming-nose
Urutan
ImageName
TO-MAKR-001A0
Tools : 1 Step Earwire Maker / 1pc

Create professional looking ear wires in any color wire in just one squeeze. Simply cut a 2 inch length of wire, insert into the open ear wire maker and squeeze the handles together!
Tool will accept 20 to 24 gauge wire. This is both a time and a money saver. You will be creating the basis for multiple sets of earrings in mere minutes.


ID: 2478 Stok: 2 Rp
485,000
TO-PLIER-0073
Forming plier /1pc

Multi-Step Wire looping plier: Make consistant loops using the 3 barrels
The lower jaw is covered with PVC tubing to prevent scratching or marring the wire
Features stainless steel heads and cushion grips
Barrels measure:
5, 7, & 10mm
13, 16, & 20mm


ID: 6177 Ada pilihan
Stok: 17 Rp
252,000
TO-PLIER-0075
Forming plier : Duck Billed nose plier / 1pc

The perfect tool for holding flat stock during finishing.
Jaws are 1-1/4" long and 5/8" wide at the tips. 6-1/2" long overall with box joint construction.


ID: 15384 Stok: 1 Rp
420,000
TO-PLIER-0077
Bracelet Making Pliers / 1pc

Ideally suited for creating bracelets, this tool can make large curves into flat metal stock without marring engraved or embellished surfaces.

  • Ideal for making bracelets quickly & easily
  • Creates large radius curves into flat metal stock
  • Lap joint construction
  • Foam grip handles
  • Two cylinder size(diameter)
    • Small: 25.4mm&34.9mm
    • Large: 34.9mm&41.3mm


ID: 14765 Ada pilihan
Stok: 6 Rp
667,000
TO-PLIER-007A
Bail and Loop making plier / 1pc

Plier ini digunakan untuk membuat "Loop" bermacam macam ukuran
Diameter tangnya lurus (tidak mengecil) sehingga untuk membuat loop bisa selalu sama ukurannya.


ID: 12532 Ada pilihan
Stok: 19 Rp
307,000
TO-PLIER-007C
Combination Flat / Half-Round Nose Bending Pliers / 1pc

Plier ini mempunyai kombinasi ujung Flat dan Setengah lingkaran, cocok untuk menekuk / membuat bentuk diatas kawat yang pipih atau plat.


ID: 12533 Stok: 0
Booking
Rp
99,000
TO-PLIER-007D
Wubbers Square Mandrel Pliers / 1pc

Wubbers Square Mandrel Pliers are good for a number of uses including making even coils, square jump rings, tubes, square beads, and much more! The large, padded, turquoise handles are extra comfortable and measure 6-1/4" long.
The square jaws are a continuous square mandrel (as opposed to being tapered). In addition, the jaws are two different sizes so that you may create a wide variety of square shaped pieces.
The length of each jaw is 34mm.

Small: The larger jaw measures approximately 5mm square and the smaller is 3mm square.
Medium: The larger jaw measures approximately 8mm square and the smaller is 6mm square.


ID: 12537 Ada pilihan
Stok: 10 Rp
940,000
TO-PLIER-007E
Wubbers Triqngle Mandrel Pliers / 1pc


ID: 12538 Ada pilihan
Stok: 7 Rp
723,000
TO-PLIER-007F
Wubbers Oval Mandrel Pliers / 1pc


ID: 12535 Ada pilihan
Stok: 8 Rp
760,000
TO-PLIER-007G
Wubbers Half Round Mandrel Pliers / 1pc

A favorite among wire-working jewelers, this pair of Wubbers® half-round mandrel pliers creates round loops in two sizes. Versatile, comfortable and practical to use, these pliers feature handles angled to give you a powerful grip. Use these half-round mandrel pliers to make smooth curves and half-round components!


ID: 15385 Ada pilihan
Stok: 7 Rp
485,000
TO-PLIER-007N
Dimple Pliers : Flat 3mm / 1pc

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.


ID: 14766 Stok: 2 Rp
297,000
TO-PLIER-007P
Dimple Pliers : Flat 5mm / 1pc

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.


ID: 14767 Stok: 3 Rp
297,000
TO-PLIER-007Q
Dimple Pliers : Flat 7mm / 1pc

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.


ID: 14768 Stok: 2 Rp
297,000
TO-PLIER-007R
Dimple Pliers : Hooked jaw 1mm / 1pc

Place the point of the hooked jaw at the exact spot you wish to drill. Squeeze the plier to create a dimple. The ergonomic design requires little force. The hooked jaw allows easy reach into tight spots. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.


ID: 14769 Stok: 3 Rp
273,000
TO-PLIER-007S
Dimple Pliers : Hooked jaw 3mm / 1pc

Place the point of the hooked jaw at the exact spot you wish to drill. Squeeze the plier to create a dimple. The ergonomic design requires little force. The hooked jaw allows easy reach into tight spots. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.


ID: 14770 Stok: 2 Rp
322,500
TO-PLIER-0085
Plier, High tech series #5-A, beads crimping plier / 1pc

  • For crimping 2-3mm pipe


ID: 2636 buy 4 = 20%
Stok: 4 Rp
195,000
TO-PLIER-0086
Plier, High tech series #5-B, beads crimping plier / 1pc

  • For crimping 3-4mm pipe


ID: 2637 buy 4 = 20%
Stok: 0
Booking
Rp
251,000
TO-PLIER-0089
4 in 1 Bead Crimping Plier / 1pc

New from Xuron® -- a bead crimping plier that precisely crimps/folds 1, 2, and 3 millimeter crimp tubes and includes a chain nose plier for handling delicate beads, micro-crimps and for adding an extra squeeze to your crimps, if desired.
The folding stations are designed to fit three different size crimp tubes (1, 2 & 3 mm) and ensure a secure and attractive result.
As with all Xuron® Pliers, the 4 in 1 Crimper has soft rubber hand grips and a return spring that opens the tool after each squeeze.


  • Size: 135mm
  • ID: 15376 Stok: 0
    Booking
    Rp
    420,000
    TO-PLIER-008C
    1 step crimper / 1 pc


    ID: 2474 Stok: 2 Rp
    450,000
    TO-PLIER-101Z
    Parallel Action Zig Zag Bending Plier (Eurotool brand) / 1pc

    Give a new twist to your designs with our new Parallel Action Zig-Zag Bending Plier. This simple to use parallel plier reduces repetitive wrist motion and saves time because it creates several zig-zags all at once. Simply place the wire in the jaw and squeeze - instantly you have one inch of uniform zig-zag design. Move the wire over to easily continue the zig-zag pattern in the desired length. Use on 20 gauge or lighter soft wire, 24 gauge or lighter soft metal blanks and even stringing wire! Head and jaws are made of high grade steel for years of use. Length 5-1/4" (135mm).


    ID: 15389 Stok: 1 Rp
    634,000
    TO-PLIER-2150
    Plier : 1 Step Looper Cuts & Loops Wire / 1pc

    Trim and Loop in One Step

    • Create & trim eye pins in one motion!
    • Works with dead-soft or half-hard precious metal wire; craft wire; and copper or brass core wire
    • Consistent size loops every time
    • Bends & trims wire between 26-18 gauge
    • Customize the length of eye pins


    ID: 2476 Ada pilihan
    Stok: 5 Rp
    631,000
    TO-PLIER-2151
    Plier : Swanstrom series #51 Wire looping plier / 1set


    ID: 7697 buy 10=10%
    Stok: 1 Rp
    1,933,500