This is the original butane refillable micro torch made in Japan, featuring the state-of-the-art Piezo Quartz Crystal Electronic instant ignition.
The GB 2001 features a powerful 1.300ºC (2500ºF) butane blue torch flame and air flow adjustment dial for superior flame control with pin point accuracy at your finger tips.
The main tank body features a diamond grid design for a superior, and extra safe, grip.
The GB2001 also includes a detachable base for hands free table-top work.
The first Micro Torch available worldwide and still the best.
Dimensions: 150 x 78 x 78mm Burn Time: approx 30min - 2 hrs (with varying flame length)
NOTE : because of air freight regulation, we can only sell and ship this unit without the gas.
You have to find butane gas supplier in your nearest place.

The one and only torch to use as a single gas torch. Simply screw on a small disposable propane or propylene gas cylinder to use. Or use our adaptors to connect this torch to a bulk propane fuel tank like your barbecue tank to save money on gas.
This HotHead Torch uses propane or propylene gas brazing fuel. HotHead torch requires no oxygen bottles. This torch head is designed and developed exclusively for making glass beads. Because this torch gives you the largest flame with the least reduction. A perfect torch for beginner, or if you are on a budget. This HotHead torch will not get hot enough to melt hard glass like borosilicate Pyrex.
This torch head using 2.54mm (1") screw, You may have to find an adaptor to fit your gas bottle.

0.25mm - 30 ga (589m)
This small size (0.25mm), often used in BINDING wire for soldering purpose.

For holding parts to be soldered or cemented together. Can also be used for stringing parts to be lacquered or cleaned.

Note:
Mica Plate (Brown Transparent Round Plate)
>> For Art Clay
Do not put this on an observation hatch.
While baking, gas comes out.
To degass, use the machine without this mica plate.
>>For Cloisonné (Shippou Yaki)
Recommended to use this mica plate.
** How to put Mica Plate **
Loosen with a screwdriver of diamond shape plate
that is attached to the door of the electric kiln.
Then put this mica plate in the gap between the door
and this diamond shape plate and tighten with the driver again.

Size: :0.8mm x 400mm

Size : 50x40mm (approx 5gram)

• Guna : bahan solder untuk Gold filled, Brass, dan Bronze.
• Material : Brass (FREE Cadmium)
• Ukuran 25 x 50 x 0.25mm (kira kira 3 gram)
• Flow temperature 616°–816 C (1140°–1500°F)

Protect components from direct flame with this clay-like heat sink. It protects most stones while your are soldering around them, and it acts as a barrier between the stones and flame, so stones don’t have to be removed. Effective for direct-flame temperatures up to 5,000°F (2,760°C). Non-toxic, odorless clay-like material washes off with water. Handy applicator syringe included; replacement syringes are available.

please note:

• Not recommended for softer stones such as turquoise, coral, malachite, pearls or opal.
• Do not quench—air-cool after soldering.

Small Sterling Silver Tree of Life Component with 5mm soldered ring. String through soldered ring or remove ring and wire wrap through the spaces between the branches on each side for different look.

Solder safely with the proven reliability of LEAD free, Cadmium free
This Smart Solder is free-flowing at very low temperatures and creates a clean, tarnish free, silver color joints.
Already contains special flux formula, NO NEED additional flux agent.
Ideal for use with all non-ferrous metals except aluminum
Extremely strong final joint is silver color.
Composition : 96%tin, 3.5% silver, 0.35% antimony and a flux agent.
Flow temp: 212'Celcius
Tensile strength: 10.000 - 25.000 (psi)
Syringe qty: 15gram