Metal craft
Urutan
ImageName
PC-CUTS-024A5
Sizzix : Vintaj Deco Etch and Deco Emboss dies / 1pc
  • DecoEtch
    DecoEtch digunakan untuk membuat efek Etching diatas metal. untuk membuat perhiasan, maupun hiasan scrapbooking, pernak pernik shadow box dll.
  • DecoEmboss
    DecoEmboss digunakan untuk membuat efek Emboss (lebih dalam dari Etching ), dimana permukaan atas tenggelam dan permukaan baliknya timbul.
  • DecoEtch dan DecoEmboss diatas digunakan bersama sama dng alat Vintaj (id: 16365), dan setelah efek timbul tersebut dibuat, anda dapat membuat efek antik dengan menggunakan "Patina solution" (id: 15537).

ID: 16366 Ada pilihan
Stok: 10 Rp
78,000
PO-F-1EY1A00A
Metal Eyelet ( hollow) / 1 set
  • di jual per pak isi 100
  • Size : Post diameter x Post length

ID: 2244 Ada pilihan
Stok: 24 Rp
117,000
PO-F-1RV1A00A
Metal rivet ( hollow ) / 1 set
Size: Post diameter x Post length

ID: 2247 Ada pilihan
Stok: 17 Rp
117,000
PO-F-1RV1A00C
Metal rivet ( solid ) / 10pcs
Sold in a set of 10 pcs.
Post diameter : 1.2mm
Post length : 6mm
Head diameter : 3.5mm

ID: 2246 Stok: 79 Rp
9,200
PO-MT1RD-AL00
Rod (Round) Aluminum / set
  • Bahan aluminum anti korosi.
  • Komposisi alloy: Al-Mg (series 5000) JIS designation: 5056
  • Permukaan sudah di polished, siap untuk di anodizing
  • Di jual per SET, jumlah perset tergantung ukuran (lihat bagian option).
    misalnya ukuran 1.0mm (40) --> artinya ukuran ini satu set terdiri dari 40 batang.

ID: 13632 Ada pilihan
Stok: 10 Rp
68,000
PO-MT1RD-BR00
Rod (Round) Brass / set
  • Brass alloy Standard screw machine brass
  • ASTM-B16, alloy C 360
  • Penjelasan produk
    Brass Rod C360 ASTM-B16 adalah bahan standar untuk pembuatan "machine screw", hasil bubutan halus, mudah di plating, serta mudah di solder.
  • Di jual per SET. (jumlah batang per set lihat angka dalam kurung di bagian pilihan)
    misal : ukuan 0.3mm, per SET isi 20, and 3mm perset hanya 1 batang.
  • Semua panjangnya 300 mm (30cm)

ID: 13631 Ada pilihan

Bisa Back Order
Rp
68,000
PO-MT1RD-ST00
Rod (Round) Stainless Steel /set
Material : JIS G 3522 (Music spring wire is a steel wire with long history that the strength is given by the special heat treatment and cold drawing process by using special high quality high carbon steel wire rods. This process is similar as hard drawn steel wire, but music spring wire is manufactured more politely, and under severe quality control)
Di jual per SET. (jumlah batang per set lihat angka dalam kurung di bagian
pilihan)
Semua panjangnya 300 mm (30cm)

ID: 13633 Ada pilihan

Bisa Back Order
Rp
92,000
PO-MT1SH-2BR1
Metal sheet : Brass / 1pc

  • size: 6 x 6 inch (15.2 x 15.2 cm)
  • ID: 13644 Ada pilihan
    Stok: 15 Rp
    109,500
    PO-MT1SH-2BR3
    Metal sheet : Red Brass / 1pc

  • size: 6 x 6 inch (15.2 x 15.2 cm)
  • ID: 13645 Ada pilihan
    Stok: 11 Rp
    96,000
    PO-MT1SH-2BZ0
    Metal sheet : Bronze half-hard with mirror finish / 1 pc
    • Half-hard jeweler's metal sheet is suitable for milling, forming, etching, punching, embossing and antiquing and is polished to a mirror finish.
    • Also known as Merlin's gold, jeweler's bronze is an alloy of 85% copper and 15% zinc.
    • Use a felt-tip or ballpoint pen to draft designs on the sheet. Cut with a jeweler's saw for clean edges. Sheet can be used with the Epic™ Six QuicKutz® embossing tool.

  • size: 6 x 6 inch (15.2 x 15.2 cm)
  • ID: 13641 Ada pilihan
    Stok: 7 Rp
    184,500
    PO-MT1SH-2CP1
    Metal sheet : Copper /1pc

  • size: 6 x 6 inch (15.2 x 15.2 cm)
  • ID: 13646 Ada pilihan
    Stok: 5 Rp
    123,000
    PO-MT1SH-2CP2
    Metal sheet : Copper half-hard with mirror finish / pc
    • Half-hard jeweler's metal sheet is suitable for milling, forming, etching, punching, embossing and antiquing and is polished to a mirror finish.
    • Made of 99% pure copper, the sheet is polished to a mirror finish.
    • Use a felt-tip or ballpoint pen to draft designs on the sheet. Cut with a jeweler's saw for clean edges. Sheet can be used with the Epic™ Six QuicKutz® embossing tool.

  • size: 6 x 6 inch (15.2 x 15.2 cm)
  • ID: 13642 Ada pilihan
    Stok: 3 Rp
    228,000
    PO-MT1SH-2NS1
    Metal sheet : Nickel Silver /1pc

  • size: 6 x 6 inch (15.2 x 15.2 cm)
  • ID: 13647 Ada pilihan
    Stok: 7 Rp
    132,000
    PO-MT1SH-2NS2
    Metal sheet : Nickel silver half-hard with mirror finish / pc
    • Half-hard jeweler's metal sheet is suitable for milling, forming, etching, punching, embossing and antiquing and is polished to a mirror finish.
    • Also known as German silver, nickel silver is actually an alloy of copper, zinc and nickel.
    • Use a felt-tip or ballpoint pen to draft designs on the sheet. Cut with a jeweler's saw for clean edges. Sheet can be used with the Epic™ Six QuicKutz® embossing tool.
    Size : #32(0.2mm) only

  • size: 6 x 6 inch (15.2 x 15.2 cm)
  • ID: 13643 Stok: 1 Rp
    262,500
    PO-MTRB000A00
    Metal blank plate and strip / 1 unit
    • Berbagai macam bahan metal ( pelat, setrip, dll)

  • PO-MTSH-X101A
    Wire Form Metal Mesh (Aluminum) / 1pc
    Amaco WireForm is a specially manufactured metal mesh that is pliable enough to mold, yet sturdy enough to add structure to clays and modeling materials. It works exceptionally well as a base for clay, plaster, and papier mâché. A flat piece of WireForm easily transforms into three-dimensional shapes by simply molding, crimping, twisting, expanding, and gathering.
    This product has incredible flexibility and strength. Its unique raised diamond strands expand to form three-dimensional shapes. Since it can be stretched into tight contours and shapes, it is ideal for detailed projects and delicate crafts.
    Size 406 x 508 mm
    Material : 100% Aluminum

    ID: 13651 Ada pilihan
    Stok: 2 Rp
    125,000
    PO-MTSH-X101C
    Wire Mesh Woven Wire Fabric / 1pc
    This woven 80 mesh looks and feels like fabric, but will hold its shape. Cuts easily with scissors and can be used to create a variety of art and craft projects. Available in both copper and brass.

    ID: 13652 Ada pilihan
    Stok: 0
    Booking
    Rp
    298,500
    xx
    Metal sheet : Aluminum Anodized sheet / 1 pc
    Ini adalah Bahan aluminum yang sudah di Anodized.
    Fungsinya macam macam, misalnya
    • Menggunakan mesin laser (atau alat grafir) di grafir sehingga coating atasnya hilang dan tampak warna dasarnya. untuk tujuan pembuatan label award, label mesin, barang promosi, papan nama dll.
    • Saat ini sementara tersedia 3 warna (Emas, Hitam, Merah) dan ukuran A4
      Warna lain sesuai permintaan dan ukuran lain (max 1 x 2 meter) dapat dipesan khusus.

    ID: 13658 Ada pilihan

    Bisa Back Order
    Rp
    75,000